Arduino 2.4" TFT LCD Touch shield is an Arduino UNO/ Mega compatible multicolored TFT display with touch-screen and SD card socket. It is available in an Arduino shield compatible pinout for attachment. The TFT driver is based on ILI9325D with 8bit data and 4bit control interface.
The Arduino 2.4" TFT LCD Touch shield can work with both 3.3V and 5V, so it can dispaly on Chipkit UNO32 and Simplecortex as well.
- Arduino UNO Rev3 / Mega Shield compatible footprint
- Arduino library UTFT support
- TFTResolution : 240 x 320 pixels
- Size : 2.4"
- Colors : 262K
- Backlight : LED
- Driver IC: ILI9325D
Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents by correcting the errors, adding more demo codes or tutorials.
For technical support, please open a ticket on Itead Support System.
- Additional Information
Version 1.0 Compatible Mainboard
- Leaf maple
- Arduino MEGA
- ChipKit MAX32
- ChipKit UNO32
- FEZ Panda II
- Iteaduino ADK
- Iteaduino BT
- Iteaduino MEGA 2560
- Simple Cortex
- Seeduino MEGA
Board Size 61mm x 51mm Operation Level
- Digital 3.3V
- Digital 5V
Stackable No Model IM120417012 Accessories No Weight 45.0000
Customer Reviews 1 item(s)
- Works well with ITEADuino MEGA 2650
Most example sketches from the UTFT and UTOUCH libraries need more than 32K of program memory so the shield needs to be teamed up with the ITEADuino MEGA to really see what it can do.
The not so obvious thing needed when using the MEGA is to edit the library file UTFT\hardware\avr\HW_AVR_Defines - there is a line that must be un-commented.
Set up for these libraries should be included in the user guide - for the display it is UTFT myGLCD(ITDB24E_8,A5,A4,A3,A2); for the touch part it is UTOUCH myTOUCH(A1,10,A0,8,9);
Price Value Quality